KPT LABS

Network hardware testing

Run diagnostics, review terminal output, and download test reports.

UNIT UNDER TESTChoose a platformDEMO-UNIT-001 · synthetic specimen

WORKFLOWREADYEight acceptance stages

DEMO OUTCOME—Awaiting test evidence

HARDWARE VERDICTNOT TESTEDSimulation cannot certify hardware

Live terminal output

Server-driven simulation · full transcript

Device under testSIMULATED

KPT LABS / DEVICE CONSOLE

Start an acceptance run to inspect the device transcript.
Choose a fault scenario to see how an issue changes the result.

No equipment connected.

Traffic instrumentSIMULATED

KPT LABS / INSTRUMENT CONSOLE

Synthetic traffic and measurement events appear here.
An external traffic instrument is required for physical
line-rate measurements.

Port & frame coverage

Awaiting evidence

Port	Frame	TX / RX Gb/s	Loss	Result
Each tested frame size gets its own evidence row.

Diagnostic findings

Results and explanations

A completed run shows each check, its outcome, and the reason.

DEVICE PROFILES

Supported platforms

Starter profiles for Cisco IOS XR and NX-OS, Juniper Junos, Arista EOS, SONiC, and Linux. Physical integrations require validation against the actual model and firmware.